RL Series Baffle and Trim 2015
HALO LED Retrofit Baffle and Trim is designed for most 5" or 6" recessed downlight housings. Designed for IC or non-IC ceilings in residential and commercial spaces.
Lighting Similar Videos
DLVP 22: Connecting to the RRU
Learn how to connect a Power Module that is powered from an emergency power source to a Remote Relay Unit for power loss sensing in a DLVP System. Also find out how to configure fixture response when an alert signal is received.
DLVP 21: Connecting Demand Response
This video will demonstrate how to connect the OpenADR EISSBox module to the Distributed Low Voltage Power System. The second half of the video will demonstrate how to configure the amount of reduction upon receipt of the Demand Response signal.
DLVP 03: Connecting Wallstations
This video will demonstrate how to connect wallstations to the Distributed Low-Voltage Power system. For more information visit www.eaton.com/DLVP
DLVP 08: Assigning a Fixture to a Zone using the Remote
This video will demonstrate how to assign a fixture to a control zone in the Distributed Low-Voltage Power System using the hand held programming remote. For more information visit www.eaton.com/DLVP
DLVP 13: How to configure the Occupancy Sensor Settings
This video will demonstrate how to use the Power Module’s onboard configuration switches to select the desired occupancy sensor operation. For more information visit www.eaton.com/DLVP
DLVP 15: Sharing Occupancy Sensors
This video will demonstrate how to share information from an occupancy sensor to more than one power module in the Distributed Low-Voltage Power system. For more information visit www.eaton.com/DLVP